Description
Design:
- Fully floodable, vertical, close-coupled single or double – stage submersible motor pumps, for a maximum submergence of 10 m.
drainage pump
Additional information
| Type of bearing | Ball bearings |
|---|---|
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Impeller material | Cast Iron, Non metallic |
| No. of impeller entries | Single entry |
| ype of lubrication | Pressurized oil lubrication |
| Max. permissible fluid temperature | 40 °C |
| Pump set location | Wet well |
| Shaft material | 1.4021,1.4301,1.4401 |
| Suction characteristics | Submerged |
| Type of casing | Volute casing |
| Type of Impeller | Closed / Open Impeller |
| Type of connection | Thread |
| Free passage | 35 mm |
| Maximum Head | 75 m |
| Minimum Head | 1.5 m |
| Installation position | Vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Waste water, Sewage, Building services, Water |
| Casing material | Aluminum Alloy, Cast Iron |
| Maximum drive rating | 7.5 kW |
| Type of installation | Stationary, portable |
| Maximum flow rate | 130 m3/h |
| Minimum flow rate | 1 m3/h |
| Maximum speed of rotation | 3000 1/min |