Description
- Horizontal or vertical, long or close-coupled,
- multistage centrifugal pump in ring-section design,
- with axial or radial suction nozzle, cast radial impellers.
Usages:
Type of bearing | Ball, Rolling element and plain bearings |
---|---|
Casing partition | Radially split |
Drive frequency | 50 / 60 Hz |
Type of drive | Electric motor / Diesel Engine |
Drive voltage | Low voltage |
No. of impeller entries | Single entry |
Impeller material | Horizontal Cast Iron, Carbon Steel, St.Steel, Cast Bronze |
Type of coupling | Direct |
Type of lubrication | Grease /Oil and product lubrication |
Discharge casing material | Cast Iron, Carbon Steel, St.Steel, Cast Bronze |
Max. permissible fluid temperature | 140 °C |
Min. permissible fluid temperature | -10 °C |
Nozzle position | Side – Top (or other on request) |
Maximum rated pressure (discharge) | PN 16, PN 25, PN 40, PN 63 |
Type of stage casing | Stage casing with diffuser |
Pump set location | Dry installed |
Shaft material | Carbone Steel, Stainless Steel |
Stage casing material | Cast Iron, Carbon Steel, St.Steel, Cast Bronze |
Suction casing material | Cast Iron, Carbon Steel, St.Steel, Cast Bronze |
Suction characteristics | Non-priming |
Type of connection | Flange |
Type of discharge casing | Annular casing |
Type of suction casing | Annular casing |
Maximum Head | 310 m |
Minimum Head | 20 m |
Installation position | Horizontal |
Shaft seal type | Mechanical seal, Gland packing |
Main applications | Industry and process Engineering, Water supply, Building services |
Casing material | Cast Iron Alloys |
Maximum drive rating | 355 kW (more on request) |
Type of installation | Stationary |
Maximum flow rate | 440 m³/h (more on request) |
Minimum flow rate | 2 m³/h |
Maximum speed of rotation | 3500 1/min |
Maximum discharge-side pressure | 96 bar |