On the test bed of centrifugal pump, the centrifugal pump performance has been investigated using water and viscous oil as Newtonian fluids, whose
kinematic. viscosities are 1×10-6, 43×10-6 and 62×10-6 m2/s, respectively. Also, the finite volume method is used to model the three dimensional viscous
fluids for different operating conditions. For these numerical simulations the SIMPLEC algorithm is used for solving governing equations of incompressible viscous/turbulent flows through the pump. The k-ε turbulence model is adopted to describe the turbulent flow process.
These simulations have been made with a steady calculation and using the multiple reference frame (MRF) technique to take into account the impeller volute interaction.
Numerical results are compared with the experimental characteristic curve for each viscous fluid.
The data obtained allow the analysis of the main phenomena existent in this pump, such as: head, efficiency, power and pressure field changes for different
operating conditions.
Also, the correction factors for oils are obtained from the experimental for part loading (PL), best efficiency point (BEP) and over loading (OL) and the
results are compared with proposed factors by American Hydraulic Institute (HIS) and Soviet Union (USSR).
The comparisons between the numerical and experimental results show a good agreement.
 |
https://navidsahandpump.com/en/wp-content/uploads/2021/11/5-1.pdf | Author: Dr. Mir Buick Ahqaghi |